Gorilla Epoxy Glue 25ml

• Gorilla Epoxy delivers a strong, long-lasting bond to both household and automotive repairs
• The easy-to-use syringe dispenses an equal amount of resin and hardener, that when mixed together creates a permanent, durable and water resistant bond
• The two-part, gap-filling Gorilla Epoxy formula sets in 5 minutes and easily bonds steel, aluminium, glass, wood, ceramic, tile and most plastics
• It dries crystal clear, ensuring your projects look spotless
• All surfaces to be bonded should be clean and dry
• To improve adhesion, roughen smooth surfaces with sandpaper before gluing
• Ensure your work area is well-ventilated and protected from spills
• Remove stir stick from middle of plunger
• With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip
• Dispense resin and hardener onto a clean, disposable surface until they are both flowing equally
• Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray
• The package blister can be used as a mixing tray for the first use
• Stir the mixture for at least 20 seconds, until it is uniform
• As you mix, you will notice that the epoxy warms up – this is a reaction that occurs as the resin and hardener combine
• Apply mixture to surface within 5 minutes
• Bond strength will decrease the longer you wait to apply
• Remove any excess glue immediately from project surface with a dry cloth
• To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes
• Full cure achieved in 24 hours
• **Not recommended for use on polyethylene or polypropylene plastic or similar materials**

 "HAZARD INFORMATION"

"Danger"

[Refer to Safety Sheet in "Downloads" section]

H315: Causes skin irritation. 

H317: May cause an allergic skin reaction. 

H318: Causes serious eye damage. 

H412: Harmful to aquatic life with long lasting effects.