K Post Setting Cement (Postmix) 20kg

• The Original K Post - Guaranteed Full Weight in Every Bag.
• Beware of Under-Weight Competitors.
• Pre-blended, fast setting cementitious material.
• Used for the erection of all types of fencing posts, gate posts, line posts, rotary lines etc.
• Instructions for use:
• Dig hole of suitable size and depth for post to be erected (depending on size the post should have between 25% and 33% in the ground).
• Place post in centre of hole.
• Half fill hole with clean water (2.5 litres).
• Pour the post mix evenly around the post.
• Add remaining water to dampen any dry post-mix (total water per bag 5 litres).
• Lightly compact to remove any trapped air.
• Plumb the post and prop for approx 15 minutes or until post is stable.
• Allow concrete to set prior to commencing any further work.
• Fill remainder of hole with soil, sod or pebble.
• Usage: One bag is sufficient to support a post in a hole measuring 250 x 250 x 350mm.
• Do not use in temperatures below 5 degrees Celsius or when ground is frozen.
• Protect from excessive drying.
• When mixed with clean water post mix will meet the requirements of I.S. EN 206-1: Concrete-Part 1: Specification performance, production and conformity.
• Strength;
• after 1 Day 5N/mmsq
• after 28 Day 20N/mmsq.
• Quality product from Kilwaughter Minerals

 "HAZARD INFORMATION"

"Danger"

[Refer to Safety Sheet in Downloads section]

H315 - Causes skin irritation. 

H317 - May cause an allergic skin reaction. 

H318 - Causes serious eye damage